Cranes - Construction Safety

Hazard: Significant and serious injuries may occur if cranes are not inspected before use and if they are not used properly. Often these injuries occur when a worker is struck by an overhead load or caught within the crane's swing radius. Many crane fatalities occur when the boom of a crane or its load line contact an overhead power line.

Solutions:

• Check all crane controls to insure proper operation before use.
• Inspect wire rope, chains and hook for any damage.
• Know the weight of the load that the crane is to lift.
• Ensure that the load does not exceed the crane's rated capacity.
• Raise the load a few inches to verify balance and the effectiveness of the brake system.
• Check all rigging prior to use; do not wrap hoist ropes or chains around the load.
• Fully extend outriggers.
• Do not move a load over workers.
• Barricade accessible areas within the crane's swing radius.
• Watch for overhead electrical distribution and transmission lines and maintain a safe working clearance of at least 10 feet from energized electrical lines.

Safety Courses in Chennai | Nebosh Courses in Chennai | International Diploma in OSH

Contact: +91 90258 02211 | info@poshesolutions.com